Features : 

• Wessbond SE-302 Steel Filled Epoxy is a fast-setting adhesive which forms High-strength and High-quality bonds to join things together. It works through a chemical reaction between the resin and hardener. This reactino leads to strong bonds that are resistant to most chemicals.

Purpose :

• Fills cracks, drill, tap, machine, sand or paint over it
• Suitable for :
• All Metals
• Plastics
• Ceramics
• Waterproof
• Working Time in 10 minutes

Directions for Use : 

1. Make sure the surfaces to be joined or repaired are roughened, clean, dry and free from dust for best results
2. Open the caps. Pierce the nozzles of tubes. Squeeze equal lengths of resin and hardener into a clean and discard-able small container with equal pressure from the bottom of tubes so that the diameters of beads are uniform.
3. Mix thoroughly until a mixture with consistent colour is obtained. 
4. Apply onto the surfaces to be joined or repaired. Set in 15 minutes. Item can be handled in 2 hours. Full bond strength in 16 hours.
5. Clean the caps and nozzles of tubes and then replace the caps tightly to the respective tubes for storing. Otherwise, hardening may occur in the tube nozzles.